Victor Dewald

DeWald Remodeling & Plumbing

Simple Repairs Homeowners Can Tackle for Everyday Plumbing Issues

Photo by MART  PRODUCTION on Pexels

What Small Plumbing Problems Can Homeowners Usually Fix Themselves?

Many common plumbing issues in Amarillo, TX homes can be safely addressed without special training or equipment. Slow drains, running toilets, dripping faucets, low water pressure, and minor leaks are all problems area residents frequently manage on their own. Knowing basic fixes helps prevent minor issues from escalating into costly repairs.

How Can I Unclog a Sink or Shower Drain Without Harsh Chemicals?

For most slow drains, mechanical removal is best. Begin by pulling out visible debris by hand, especially hair or buildup at the drain cover. Next, use a plunger, ensuring you have enough standing water to cover the plunger cup. Create a firm seal and plunge several times.

If that doesn’t work, a simple drain snake or even a straightened wire hanger can pull out deeper clogs. Feed the tool slowly to avoid scratching the pipe. In older homes across the city, buildup from hard water minerals can contribute to slower drainage; flushing the drain weekly with hot (not boiling) water can help reduce these deposits.

What Should I Do if My Faucet Won’t Stop Dripping?

A dripping faucet wastes water and can usually be fixed by replacing a worn-out washer or cartridge. Turn off the supply valves under the sink first. Remove the handle (usually with a small screw), then unscrew the packing nut to access the inner parts. Take the old washer or cartridge to a hardware store for comparison before purchasing a replacement.

Many area homes use either compression faucets (washers) or cartridge faucets. If your house has older fixtures, washers wear out more quickly in Amarillo’s mineral-rich water. Reassemble in reverse order. Be gentle when tightening components; over-tightening can crack parts or damage the fixture.

How Do I Stop a Toilet from Running Constantly?

A toilet that won’t stop running is often caused by a faulty flapper, fill valve, or float. First, open the tank lid and observe the mechanism as you flush. If the chain gets caught or the flapper doesn’t reseat properly, untangle or adjust the chain length. If the flapper is worn or warped, turn off the water supply behind the toilet, drain the tank, and replace the flapper with a matching model.

Float adjustments are common fixes during dry months when water pressure fluctuates. The float should be set so the water stops about an inch below the overflow tube. Most new fill valves are easy to adjust with a screw or sliding clip. Always check for leaks at the base after working inside the tank.

What Causes Low Water Pressure in a Single Fixture?

Low pressure at only one faucet or shower is usually from a blocked aerator or showerhead. Unscrew the tip of the faucet or showerhead by hand or with a soft cloth and pliers. Soak aerators or heads in vinegar overnight, then rinse and scrub with a toothbrush to remove mineral deposits. For stubborn buildup, poke out debris gently with a toothpick.

If pressure returns to normal, reinstall the cleaned part. If the problem persists at all fixtures, it may point to a broader issue in the home’s supply line, which is more common in neighborhood areas with aging galvanized pipes.

Is It Safe to Tighten a Leaky Pipe Connection Myself?

Minor leaks at supply line joints beneath sinks or toilets can often be tightened gently by hand or with an adjustable wrench. Feel for dampness with a paper towel to identify the exact location. Most leaks at flexible supply lines, like those connected to faucets or toilets, simply require a quarter turn to stop slow drips.

If a leak persists after gentle tightening, turn off the supply valve and consider replacing the rubber washer or supply hose. Avoid using pipe sealing compounds or tapes unless you’re confident, as improper use can worsen leaks. Any sign of corrosion or green buildup usually means a replacement is needed rather than a quick fix.

How Can I Prevent Problems in Underground or Outdoor Plumbing?

Seasonal temperature changes, especially through Amarillo’s freeze-thaw cycles, stress outdoor faucets (hose bibs) and underground lines. In the fall, disconnect hoses and use insulated covers on outdoor spigots to prevent frost-split pipes. During spring and summer, check that outdoor faucets and irrigation systems aren’t dripping—small leaks can add up to significant water waste, especially in dry periods.

Homeowners in newer developments may also have pressure-reducing valves (PRVs) on their main line. Check the manufacturer’s instructions before attempting any adjustment.

Which Troubles Aren’t Safe to Fix on My Own?

Do-it-yourself fixes are safe for minor clogs or visible leaks, but anything involving gas lines, sewage backups, or major flooding should be left to qualified professionals due to health and safety risks. Discolored water, persistent low water pressure across the whole house, or water appearing from walls or foundations are signs of deeper issues.

Knowing when to stop and seek help is just as important as making small repairs. Amarillo’s soil can shift more than in other areas, occasionally leading to foundation movement that affects plumbing. Watch for warning signs like unexplained puddles or frequent clogs across several drains.

Why Should Every Home Have Basic Plumbing Tools?

Keeping a few essentials on hand simplifies emergencies and routine upkeep. Every household in the city benefits from:

    • A cup plunger (for sinks and toilets)
    • An adjustable wrench for basic tightening
    • A set of screwdrivers
    • Replacement washers and supply hoses
    • A small container of plumber’s grease

Having these tools ready helps resolve small issues before they become major inconveniences, especially in older homes typical of many Amarillo neighborhoods.

About the Author

Victor DeWald

Victor DeWald is the owner of DeWald Remodeling & Plumbing. Based in Amarillo, TX, Victor and his team have a great reputation for exceptional work. They ensure that they bring their expertise, passion, and attention to detail to each and every project.